1-888-285-4275
Sign In
Shopping Cart
cric 8
- Description
- Ask a Question
- Reviews
Multifunctional rope clamp with integrated pulley for rescue and rope access work. Robust, practical and intuitive, it has four different modes of operation: ascender, pulley, rope clamp/pulley or progress-capture hauling pulley.
Main features:
• its versatility, compact size and ease of use allow reducing to the minimum time, material and space needed in rope manoeuvres;
• it allows ascending the rope in accordance with EN 567 / EN 12841-B standards (ascender mode);
• it can be used as a simple pulley for lifting or transferring a load in accordance with the EN 12278 standard (pulley mode);
the integrated ball-bearing sheave can be used as a simple redirect to make it easier to ascend a rope or to lift a person without the aid of additional connectors (rope clamp/pulley mode);
• it allows the direct lifting of a load, the creation of hauling systems and the rescue or self-rescue of a person (progress-capture hauling pulley mode);
• when used in pulley mode, the rope is free to run in both directions; instead, when the hauling-pulley mode is used, the rope can only run in one direction and it is locked in the opposite one;
• when used in progress-capture hauling pulley mode, it is possible to lower the lifted load by acting on the dedicated cord connected to the cam within the device;
the easy opening, via an intuitive release button, makes the installation of the device on the rope swift – no matter the mode that is going to be used in – even with gloves on or while operating in difficult conditions;
• equipped with a steel cam featuring teeth that minimize rope wear but are effective in blocking the rope. In addition, the cam is designed with two slots to reduce the build-up of dirt, so maintaining the lock on the rope very efficient in any condition (muddy, frozen rope, etc.).
Caution! This equipment is not a fall arrester (EN 353-2 / EN 12841-A) nor can it be used for self-belaying while climbing.
Standards:
• EN 567:2013 EN 1891 – EN 564 – EN 892 -Ø 8 ÷ 12 mm
• EN 12841:2006-B EN 1891-A - Ø 10 ÷ 12 mm
• EN 12278:2007 EN 1891 – EN 564 – EN 892 - Ø ≤ 11 mm
Specifications
Climbing Technology CRIC
Part Number: H-280 Weight: 0.4 lbs.
- Description
- Ask a Question
- Reviews
Multifunctional rope clamp with integrated pulley for rescue and rope access work. Robust, practical and intuitive, it has four different modes of operation: ascender, pulley, rope clamp/pulley or progress-capture hauling pulley.
Main features:
• its versatility, compact size and ease of use allow reducing to the minimum time, material and space needed in rope manoeuvres;
• it allows ascending the rope in accordance with EN 567 / EN 12841-B standards (ascender mode);
• it can be used as a simple pulley for lifting or transferring a load in accordance with the EN 12278 standard (pulley mode);
the integrated ball-bearing sheave can be used as a simple redirect to make it easier to ascend a rope or to lift a person without the aid of additional connectors (rope clamp/pulley mode);
• it allows the direct lifting of a load, the creation of hauling systems and the rescue or self-rescue of a person (progress-capture hauling pulley mode);
• when used in pulley mode, the rope is free to run in both directions; instead, when the hauling-pulley mode is used, the rope can only run in one direction and it is locked in the opposite one;
• when used in progress-capture hauling pulley mode, it is possible to lower the lifted load by acting on the dedicated cord connected to the cam within the device;
the easy opening, via an intuitive release button, makes the installation of the device on the rope swift – no matter the mode that is going to be used in – even with gloves on or while operating in difficult conditions;
• equipped with a steel cam featuring teeth that minimize rope wear but are effective in blocking the rope. In addition, the cam is designed with two slots to reduce the build-up of dirt, so maintaining the lock on the rope very efficient in any condition (muddy, frozen rope, etc.).
Caution! This equipment is not a fall arrester (EN 353-2 / EN 12841-A) nor can it be used for self-belaying while climbing.
Standards:
• EN 567:2013 EN 1891 – EN 564 – EN 892 -Ø 8 ÷ 12 mm
• EN 12841:2006-B EN 1891-A - Ø 10 ÷ 12 mm
• EN 12278:2007 EN 1891 – EN 564 – EN 892 - Ø ≤ 11 mm
